LIST OF ILLUSTRATIONS
Figure Description Page
(SECTION 1 Model 636 Description)
- 636 Camera 1
(SECTION 2 Sequence of Operation)
- Flash charging, fire & exposure switches 3
- Strobe charging 3
- Strobe ready sequence 4
- Exposure sequence 4
- Exposure sequence: clock & photocell 5
- Fill flash sequence 5
- Flash quench, shutter closing 6
- Motor drive of pick, counter, S5 actuator 6
- Low ambient exposure sequence 7
- Subject near/far determination 7
- “ “ “ 8
- Low light near exposure control 8
- Motor drive of pick, counter, S5 actuator 9
- Subject far determination 9
- Low light far exposure sequence 10
- Motor drive of pick, counter, S5 actuator 10
- Non-flash exposure control 11
- Camera Operating/Exposure Sequence Diagram 12
(SECTION 3 Theory of Operation)
- 636 Camera 13
- 600 film pack 14,15
- 636 Flash 16
- Flash charging 17
- Flash quenching 18
- Three flash picture conditions 20
- Flash control methods 21
- High ambient, fill flash mode 22
- Photocell light measurement 23
- Low ambient flash exposure 24
- Subject near/far determination 25-28
- IR light measurement 28-33
- Exposures without flash 33
- Camera inhibits 34-35
(SECTION 4 Disassembly and Reassembly)
- Strobe components 37
1 Removing Strobe Cover 38
2 Discharging Strobe capacitor 38
3 Removing Lower Housing 39
4 Removing Flex 39
ii