EV
Refer to section in this manual titled “Adjusting the Exposure (EV Compensation)” for further
details.
Metering
This sets the metering method for calculating the exposure.
* [ ] Average: The entire area of the screen is measured, and the exposure is calculated.
* [ ] Spot: A very small portion of the center of the screen is measured, and the exposure is
calculated.
White Balance
This sets the white balance for a variety of lighting conditions and permits images to be captured
that approach the conditions that are observed in your scene.
* [ ] Auto Use this setting for most photographic picture taking conditions.
* [ ] Daylight Use this setting when there is full sun in your scene.
* [ ] Cloudy Use this setting in cloudy overcast conditions.
* [ ] Tungsten Use this settings when incandescent/tungsten lights are in your scene.
* [ ] Fluorescent Use this settings when flourescent lights are in your scene.
ISO
This sets the camera's sensitivity to light for capturing images. When the sensitivity is raised
(the ISO figure is increased), photography will become possible even in dark locations, but the
more pixelated (grainier) the image may appear.
* Auto /100 / 200
Color
This sets the color of the image that will be captured.
* Normal / Vivid/ Sepia / B&W / Negative / Red / Green / Blue
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
camera's
Polaroid a500 Digital Camera User Guide
www.polaroid.com
Auto
EN-29
To Next Page
Loading...
Need help?
General
