Camera/Printer Connection
Connecting with the USB Cable.
1. Plug Series A of the USB cable into the marked socket on your
printer. Location of USB socket will vary from printer to printer.
2. Plug Series Mini B of the USB cable into the port on your camera.
DEVICE IS
CONNECTED
NOTE:
• “
DEVICE IS CONNECTED” displays on the LCD
screen, indicating a proper connection to the printer.
• Do not connect the USB cable to the camera until
PictBridge is enable and when prompted by the
“PLEASE CONNECT TO DEVICE” screen. Or if you
already have connected the cable to the camera,
do not plug into printer until prompt to do so. Not
following this sequence will result in connection
failure.
• When “PLEASE CONNECT TO DEVICE” is displayed for about ten seconds,
it will skip to the PictBridge print setting screen even if there is no
connection between camera and printer.
To Next Page
Loading...
Need help?
General
