EN-13
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery door.
3. Load the batteries with correct orientation as shown.
4. Close the battery door and make sure it is locked
securely.
5. Insert an SD/SDHC memory card (Optional).
The camera has 16MB internal memory (13.5MB
available for image storage), but you can load an
SD/SDHC memory card (SDHC memory card up to
4GB) to expand the camera’s memory capacity.
Be sure to format the memory card with this
camera before its initial usage.
To prevent valuable data from being accidentally erased from an
SD/
SDHC memory card
, you can slide the write protect tab (on the side of
the
SD/SDHC
memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card
/
To prevent damaging of an SD/SDHC memory card, be sure to turn off
the power when inserting or removing the SD/SDHC memory card. If
inserting or removing the SD/SDHC memory card with the power on, the camera will automatically turn off.
Be careful not to drop the batteries when opening or closing the battery door.
To Next Page
Loading...
Need help?
General
