EN-28
EV
Refer to section in this manual titled “Adjusting the Exposure (EV Compensation)” for
further details.
Metering
This sets the metering method for calculating the exposure.
* [ o ] Average: The entire area of the screen is measured, and the exposure is
calculated.
* [ q ] Spot: A very small portion of the center of the screen is measured, and the
exposure is calculated.
White Balance
This sets the white balance for a variety of lighting conditions and permits images to
be captured that approach the conditions that are seen by the human eye.
* [ Blank ] Auto
* [ ] Daylight
* [ ] Cloudy
* [ ] Tungsten
* [ ] Fluorescent
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
* Auto / 100 / 200
Color
This sets the color of the image that will be captured.
* Standard / Vivid / Sepia / B&W
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
To Next Page
Loading...
Need help?
General
