EN-6EN-5
2 Getting Started
2.1 Inserting the Memory Card (not included)
Follow the direction indicated by the silk printing on the device to insert the
memory card, a click sound is heard indicating the card is in position.
To remove the memory card, push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the device is turned on. This
may damage the memory card.
2. Please use a Class 6 or higher rating Micro SD card, max. up to 32GB.
3. Please format the micro SD card before the initial use.
4. When removing the memory card, be careful that the card may spring out
and get lost. The memory slot has this spring-out feature for easy removal
of the card.
2.2 Installing in Vehicles
←Push the head of the mount into the device
slot, make sure the mount is securely locked in
place.
Note: To use suction mount, please remove the
3M base from the mount and then tted 3
suction cups into the mount.
→ Rotating the device to have
proper view.
→Position the mount or 3 suction
cups on the windshield, make sure
the mount is xed on the windshield.
2.3 Connecting to Power
Use only the attached car power adaptor for activating the device and
charging the built-in battery.
(not included)
Polaroid·DS301 Polaroid·DS301
←Cables installation chart
To Next Page
Loading...
Need help?
General
