EN-10EN-9
Remove the protection for current movie clip:
Press Power button again to remove protection for current movie clip,
lock icon will disappear from the screen, the movie clip will not be
protected and can be replaced if the SD card is full.
Note:
The recording will stop automatically and the screen will show SD card is full
if the SD card is full of protected les. To continue recording, please change
a SD card or delete the protected les manually.
Manual remove lock from videos steps:
Press Mode button switch to Playback Mode (1), press Up/Down
button to the locked le (2), then press Power button to unlock
the protection of the le, the lock icon will disappear from the le(3).
3.1.1 The Recording Screen
3.1.2 Dual Camera Recording
The default setting is dual camera recording.
On the video recording mode, press Menu button to enter menu setting,
then press Up/Down button to Output Dual Mode, press OK button ,
then press Up/Down button to select Output Dual Mode, press OK
button conrm and back menu setting, then press Menu button
to exit menu setting, dual camera recording display on the screen.
Note: The similar way to display the front camera or rear camera on the
screen.
3.1.3 A Key Protection
During recording, press Power button to protect current video, the lock
icon appears on the screen, the current movie clip will be protected and
cannot be replaced (the default setting for a movie clip is 3-minute), the next
movie clip will unlock automatically and can be replaced if the SD card is full.
101-006
(1)
101-006
(2)
101-006
(3)
Note：
To protect the recording le, press Up/Down button to the le(1), press
Power button to lock the le, the lock icon will appear on the
le(2), the le is protected.
101-006
(2)
101-006
(1)
Polaroid·DS301 Polaroid·DS301
0.0EV 2015/05/26 14:43:46
1920
1080
Video recording mode
Resolution
Power adaptor
SD card status
Front camera
exposure value
System date & time
Audio status
0.0EV
Rear camera
exposure value
To Next Page
Loading...
Need help?
General
