5. Installation of foot bracket beam: both ends
of the beam are fixed with M6 * 20 hexagonal
socket combination screws.
6. Installation of the left and right side plates of
the feeding and the paper dispenser: use M6 *
20 hex socket combination screws to fix the
side plates and thread them into the steel pipe
and the feeding.
7. Machine head installation: use M6 * 20
hexagonal socket combination screws to fix
the machine head and the rigid support.
8. Installation of waste ink bottle and ink
bucket: fix the ink bucket with M6 * 20 socket
head cap screws. The ink bucket and ink
bucket bracket are fixed with the screws
provided on the accessories.
To Next Page
Loading...
