16
OTHER FUNCTIONS .
● Volume Control
1. Press Vol+/Vol- to increase or decrease the volume when no menu is displayed on the
screen. The Volume menu will turn off automatically if there is no operation in about 5 seconds.
2. Press MUTE on the remote control to turn MUTE mode off and on. In Mute mode, “MUTE”
in red letters will appear on the upper-right corner of the screen. This sign is hidden when menu
operation is entered, but MUTE still operates. The sign appears again when menu operation is
exited. When there is no valid signal input, the TV will be mute (but no mute sign will show).
3. MTS
• The TV will identify MTS in channels automatically. The TV memorizes SAP after it is
auto identified. The TV memorizes Stereo after it is auto identified.
• There is an OSD menu to show the changes in broadcasting signals.
• Press MTS to switch between Mono, Stereo and SAP:
4. Sound Mode Selection
Press SOUND to select Personal, News, Theater and Music modes and activate the Picture
Mode for User setting. The Personal mode allows you to customize the options of the Sound
Menu in any input mode. The last three modes are default settings and cannot be adjusted.
Sound Mode Sound Quality
Personal For the user’s preference
News For general programs of conversation and news reports
Theater For better audience sound for movies
Music For general music programs
Note: The Volume Control works the same in all signal sources.
● Picture Mode Selection
Press PIC to Switch among Personal, Soft, Normal and Rich modes.
Picture Mode Picture Quality
Personal For the user’s preference
Soft For more mellow pictures
Normal For general programs
Rich For better visual effects in movies
Note: The setting of this selection works the same in all signal sources.
To Next Page
Loading...
Need help?
General