18
● Sleep Function
Press SLEEP on the remote control once to
activate the function and additional times to select
a sleep time of 0, 15, 30, 45, 60, 90, 120, 150, 180,
240 and 0 minutes. This will be reflected at the top
right corner of the screen. After this step is done,
press SLEEP to view the set sleep. See the
illustration at the right.
●
Indicator Lights in Sleep Mode
Status Light Color Description
On/Off Green/off The TV works normally; powers off
Standby Red The TV is in Standby Mode
Timer On/Off Or Sleep Yellow Timer On/Off is valid or Sleep is on
Sleep (PC) Red
Sleeps for power-saving;
Activates again as PC sends a signal or any
button on the remote control is pressed
Receive the signal from
the remote control
Flickering
The indicator is flickering when the TV
receives signal from the remote control
SLEEP 30
To Next Page
Loading...
