• Choosing a Startup Image
A start-up animation image appears on the LCD screen for a few seconds
when the camera is turned on.
You can choose a recorded image in your camera as your own startup
image:
1. Press the button to set the camera to
Playback mode.
5/150
IN
2008/01/01
18:59
7M
+2.0EV
F2.8
1/30
5/150
IN
2008/01/01
18:59
7M
+2.0EV
F2.8
1/30
Set this?
Yes
Start-up Image
Select
OK
2. Press the or button to select a desired
image.
3. Press the button.
4. Press the or button to select (Start-
up Image).
5. Press the button. A hint window will
appear on the left bottom corner of the LCD.
6. Press the or button to confirm or
give up your choice.
7. Press the button to apply the choice.
8. Press the button to set the camera to
Capture mode.
9. Press the button.
To Next Page
Loading...
