Page 5
FCC Notice (U.S.A. only)
This equipment generates and uses radio frequency energy
and if not installed and used properly, that is, in strict
accordance with the manufacturer’ instructions, may cause
interference to radio and television reception. It has been type
tested and found to comply with the limits for a Class B
computing device in accordance with the specifications in
Subpart J or part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the ID-4 System with respect to the receiver.
Move the ID-4 System into a different outlet so that the system
and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful: "How to
Identify and Resolve Radio-TV Interference problems."
This booklet is available from the U.S. Government Printing
Office, Washington, DC 20402, Stock No. 004-000-00345-4
EMI Notice (Canada)
This equipment is a Class B digital apparatus which complies
with the Radio Interference Regulations, CRC c.1374.
1
2
3
To Next Page
Loading...
Need help?
General
