that indicates the recording is in progress.
STOP: Press the SHUTTER/OK button again to stop the video recording.
After the video is captured, the remaining time for recording videos as per the memory
card size (available memory) and selected resolution appears on the top, right corner
of the LCD screen.
4) The video is automatically saved to the camera’s Micro SD Memory card.
Note:
When using the Waterproof Case (sold separately), make sure to set camera mode, settings
and zoom before placing it into the case.
Time Lapse: To use the Time Lapse feature, select the ‘Timelapse’ option from the Video
Capture Mode menu and then select the desired setting.
Time Duration: To use the Time Duration feature, select the ‘TimeDuration’ option from the
Video Capture Mode menu and then select the desired setting.
While capturing your video, after approximately 10 seconds of video capture, the LCD display
turns off in order to save power. The busy LED light remains on and the video continues to be
captured. Press the any button to reactivate the LCD display. The LCD will again be placed
into power save mode each time after approximately one minute of reactivating the LCD
display.
After recording the video, the updated amount of available time left to capture additional
videos as per your memory card size and selected resolution size appears on the LCD
screen.
If the memory card is full or the battery level is low, the camera will automatically stop
recording the video.
When using the Waterproof Case (sold separately), make sure to set camera mode, settings
and zoom before placing it into the case.
To Next Page
Loading...
Need help?
General
