10. If you close the application you can run the Polaroid Instant Memories from the Programs
(PC) or Application (Mac) menu on your computer or double click the Polaroid Instant
Memories desktop icon.
1. Use the supplied USB cable to connect your camera to your computer.
Insert the smaller end of the USB cable into the USB interface of the camera.
Insert the larger end of the USB cable into the USB port of your computer.
2. Power the camera ON.
3. ‘MSDC’ appears briefly on the camera’s LCD screen, indicating the camera is connected to
your computer in MSDC mode.
4. The first time you connect the device to the computer you may have to wait a few seconds
until the computer recognizes the device.
To Next Page
Loading...
