EasyManuals Logo

Polaroid Lab Quick Start Guide

Polaroid Lab
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start
Guide
Before you
get started.
Phone to Polaroid
01 Remove the cover from the platform. Turn the Polaroid Lab
on by pressing the platform release button on the right side
of the Lab. The phone platform will automatically lift into
ready position. Check that the rainbow LED is lit up.
03 Insert the lm pack with the darkside cover facing up.
Use only Polaroid i-Type or Polaroid 600 type lm.
06 Place your phone on the Polaroid Lab platform with the screen
facing down. Ensure that your phone is aligned lengthways
and the top of your phone is facing the top of the platform.
Remove any screen protector or phone cover, as this can impair
nal results.
08 Your photo will eject beneath the lm shield. After
ve seconds, lift the lm shield, allow it to retract into
the Polaroid Lab and then gently remove your photo.
02 Gently pull down on the lm door to open it.
04 Close the lm door. The darkslide will eject automatically
beneath the lm shield. Lift the lm shield and allow it to roll
back up, then remove the darkslide.
07
The Polaroid Lab will detect your phone on the platform. The
rainbow LED
will slowly blink three times and then stay on.
If the rainbow
LED blinks rapidly, realign your phone.
Once the
blinking stops, press the red shutter button on the front of
the Polaroid Lab.

09 Don’t shake or bend the photo! Shield it from light (in a
pocket, or face down on a at surface) until the image begins
to emerge - black & white photos take 5-10 minutes, while
color pictures take 10-15 minutes.
I
Charge the
Polaroid Lab
before use
II
The Polaroid Lab only works with
the Polaroid Originals app.
Download it from the App Store
or Google Play Store
III
The Polaroid Lab is compatible
with Polaroid i-Type
and Polaroid 600 type lm
IV
For best results, remove the
screen protector and cover from
your smartphone. Check that your
phone’s screen is clean. Cracks
and scratches on your screen will
inuence picture quality
05 Open the Polaroid Originals app and tap on the ‘Polaroid Lab’
option. Follow the instructions on the app to select the
picture that you would like to use.
Polaroid Lab
USA/Canada
usa@polaroidoriginals.com
+1-212-219-3254
EU/Rest of World
service@polaroidoriginals.com
00800 5770 1500
Have a question
you need
answered?
Contact our
Customer
Support Team
or visit polaroidoriginals.com/help
Polaroid, Polaroid Classic Border Logo, Polaroid Originals
& Design and Phone to Polaroid are trademarks of PLR
IP Holdings, LLC, used under license. PLR IP Holdings,
LLC, does not manufacture this product or provide any
manufacturer’s warranty or support.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store
is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks
of Google LLC.
©2019 All rights reserved.

Other manuals for Polaroid Lab

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaroid Lab and is the answer not in the manual?

Polaroid Lab Specifications

General IconGeneral
TypeInstant Photo Printer
Compatible FilmPolaroid i-Type and 600 film
App CompatibilityPolaroid Originals app
Power SourceRechargeable battery
ConnectivityBluetooth
ChargingMicro USB
CompatibilityiOS and Android
Photo Size3.5 x 4.2 inches
Image Area3.1 x 3.1 inches
Print Speed15 seconds
Weight1.44 lbs
Dimensions5.9 x 4.6 x 5.9 inches (150 x 116 x 149 mm)

Related product manuals