Polaroid OneStep+ User Manual

User Manual
16
User Manual
17
Lighten/Darken Use the light-
en/darken switch on the right
side of the lens barrel to adjust
the exposure of your shot. To
get a brighter photo, move the
lighten/darken switch right to
the plus/lighten position. For a
darker photo, move the light-
en/darken switch left to the
minus/darken position. These
two settings correspond to
different Exposure Values (EV).
The camera’s Exposure Values
are +½ EV (when you move the
switch to plus/lighten) and -½
EV (when you move the switch
to minus/darken).
5. Using the viewnder
The OneStep+ uses a tradition-
alviewfinderlocatedonthe
right side of the lens barrel. To
usetheviewfinder,simplyalign
youreyewiththeviewfinder
barrel and use the image you
see to compose your shot.
Note Remember that the
viewfindersitsslightly
above and to the right
of the camera’s lens —
above and to the left from
your perspective when
shooting — so you will
need to adjust your aim
to compose your shot
correctly when shooting
at distances of 1.2 meters
or less.
6. Compose your photo
The OneStep+ has two
high-qualitylenses;astandard
lens, intended for photographs
shot from 60 cm (2 feet) away
andfurther;andaportraitlens,
intended for photographs shot
from as close as 30 cm (1 foot)
away to 90 cm (3 feet) away. To
select the desired lens, use the
Lens Switch located above the
Lens Barrel. To avoid a blurry
photo, make sure you are at
least 60 cm (2 feet) away from
your subject when shooting
with the standard lens, or
30 cm (1 foot) away when
shooting with the portrait lens.
For the best results, always try
to shoot with your light source
behind you.
7. Take the photo
Press the shutter button all
the way in to take the photo.
The photo will be ejected from
the slot at the front of the
camera as soon as you let go
of the shutter button. It will be
shielded from the light by the
filmshield,andwillbeheldin
place until you are ready to
remove it.
8. Remove and shield the photo
Remove the photo from
beneaththefilmshieldandlet
thefilmshieldrollbackintothe
camera. Place the photo face
down to continue shielding it
from light as it develops.
Further Guidance
Using the portrait lens
The OneStep+ has two high-
qualitylenses;astandard
lens, intended for photographs
shot from 60 cm (2 feet) away
andfurther;andaportrait
lens, intended for photographs
shot from as close as 30 cm
(1 foot) away to 90 cm (3 feet)
away. To select the desired
lens, use the Lens Switch
located above the Lens Barrel.
Pairing with Bluetooth
®
The OneStep+ features
Bluetooth connectivity,
allowing it to be connected
to the Polaroid Originals
smartphone app, unlocking a
range of creative features. To
pair your OneStep+ with your
smartphone, press the Plus
button (located to the left of
the camera’s lens barrel) once.
ThePlusbuttonLEDwillash
blue, indicating that it is in
pairing mode and waiting for a
new connection. Ensure your
phone’s Bluetooth is switched
on and open the Polaroid Origi-
nals app, choosing the
OneStep+ option. The camera
will connect automatically. Once
your camera and smartphone
are paired, the Plus button will
change to solid blue, indicating
that it is successfully paired.
To pair your OneStep+ with
a new device, ensure that
Bluetooth is switched off on
the current paired device, then
press and hold the Plus button
for 3 seconds. The Plus button
LEDwillashblue,indicatingit
is now in pairing mode .

Polaroid OneStep+ Specifications

General

Film size	88 x 107 mm
Picture size	79 x 79 mm
Product color	White
Printing method	Pass Photo Printing Technology
Focus adjustment	Auto
Light exposure modes	Auto, Manual
Digital gamma correction	Yes
Cables included	Micro-USB
Flash modes	Auto, Flash off, Flash on
Camera shutter type	Electronic
Fastest camera shutter speed	- s
Battery type	Built-in
Battery capacity	1100 mAh
Number of batteries supported	1
Package type	Box

Weight and Dimensions

Depth	150 mm
Width	111 mm
Height	97 mm
Weight	493 g