• Using the Flash
Use the Flash when you take pictures at night, indoors, or outdoors in
heavy shadows.
Flash Range: 3 feet ~ 4.9 feet (0.9 meters ~ 1.5 meters)
Press the button repeatedly to scroll through the ash options. The ash
icon that is displayed on the Status LCD screen is the active option. The
default setting is Flash off.
Press
button
Press
button
Press button
Flash Off. The ash does not re. Use this setting for outdoor
pictures, or where ash is prohibited or may be distracting, or
when shooting toward a reective surface, such as a window or
mirror. If there is not enough light when using this setting, your
pictures will be too dark.
A
Auto Flash. The ash res automatically as needed. Use this
setting to take most pictures.
Flash On. The ash res for every picture. Use it indoors in low
light.
NOTE:
• When the camera is set to Flash on and Auto Flash, the icons on the Status
LCD will blink, which indicates the ash is charging, and they will stop blinking
when the ash has charged.
• When the battery power level is low and unable to charge the ash, there will
be a low beep tone when you press the ash button.
• When the ash is charging, you are not able to take pictures. There will be two
short beeps if you press the shutter button.
To Next Page
Loading...
Need help?
General
