4 Recording Video Clips
Use the Video mode to record video clips. When in the Video mode, the
resolution is automatically set to 320 x 240 pixels.
1. Turn the camera on.
NOTE:
To turn on the camera, slide the Power switch following the arrow and then
release. In about ve seconds, you will hear a beep sound and the camera is
ready to take pictures. Slide the Power switch again to turn the camera off.
2. Press the Mode button repeatedly until the icon “
” appears on the
status LCD. Then Press the Select button to conrm, and it will remain
solid.
3. Frame your subjects using the viewnder.
4. Press the Shutter button to start recording the video clip. The video
counter will increase in second.
5. Press the Shutter button again to stop recording, or recording stops
when the internal memory is full.
NOTE:
• There is no audio when a video clip is recorded.
• Deleting video clips is the same as deleting pictures. Please refer to “Deleting
the Last Picture” and “Deleting All Pictures” on Page 12 and 13 for details.
To Next Page
Loading...
Need help?
General
