3 Taking and Managing the Pictures
Before you take pictures, please read this note rst:
IMPORTANT!
Never remove batteries, disconnect the AC adaptor from the camera, or
unplug the adaptor while a picture is being saved. Doing so will prevent the
current picture being saved and may corrupt other pictures already stored on
the camera’s internal memory or on a memory card.
Shutter button
• Taking a Picture
1. Set the Mode selector to Manual or Auto.
2. Turn on the camera.
3. Frame your subject using the LCD screen or
viewnder.
4. Press the Shutter button half way and align the
Focus indicator (if it is set to “ON”) on the subject
you want to capture. When the focus is locked,
the auto focus mark turns green and the operation
LED will light up.
Focus indicator
1600
• The icon will only appear when the shutter speed is slower than
1/40 second. This icon reminds you to hold the camera steady.
• Operation LED lights up with red colour means taking pictures with
ash.
• Operation LED lights up with green colour means taking pictures
without ash.
• When auto focus is locked onto a subject, the focus indicator turn
green, otherwise, the focus indicator turn red.
To Next Page
Loading...
Need help?
General
