23
Polaroid PDC 330 Digital Camera User Guide
www.polaroid-digital.com
My PDC 330 Camera
LCD displays ”
” and
a continuous beep sound
will be heard.
This means there is insufcient
power.
You need to replace the bat-
teries.
Symptom
Problem Solution
My CD installation wizard
does not work.
The auto installation le is
switched to off.
or
The CD ROM is disconnected.
Go to the computer desktop
Right click on “My Computer”.
Click “Properties”. Select “Device
Manager”. Double click on “CD-
Rom”, double click on “CD-R”
(Normally the manufacturer’s
name). Click on “ Setting . Ensure
“Auto insert notication “ is
ticked and the “ disconnect “ is
ticked. If you change the settings
the computer will ask you to
restart your PC. Click “ Yes “
or
You can manually start by going
to the Windows Desktop, double
click “My Computer”, double
click your CD ROM icon and
nally double click “INSTALL-
E>EXE” le.
My PDC 330 Camera
hanged and all buttons do
not work
Take out all the batteries and
disconnect the camera from the
computer for 10 seconds. Re-
insert the batteries again.
Your camera may be affected
by the electrostatic discharge
Flash pictures are too
dark
Take picture in well lit room or
move closer to subject.
Insuffcent light or too far from
subject
Please also refer to the help les & User Guides that accompany the enclosed applications.
For
further information and support, please visit our website: http://www.polaroid-digital.com