29
Polaroid PDC 5080 Digital Camera User Guide
www.polaroid-digital.com
• Setting Flash Mode
1. Turn on the camera.
2. Set the camera to Still Image mode.
3. Press the Flash button to cycle through the ash settings and select
the one you need.
When you press the Flash button, the icon (according to the ash
setting you selected) will appear on the LCD screen. You can now take
pictures using the Flash mode you selected. The ash will recharge
after each ashed picture.
The ash range is approximately 4.9 feet to 6.5 feet (1.5 to 2 meters).
Flash Mode
To Next Page
Loading...
