7
SAFETY INSTRUCTIONS
WARNING
WARNING - BURN HAZARD:
Parts of this product get very hot during use
(approx. 180 - 200°C / 356 - 392°F).
DO NOT
touch the tip of the pen, the
surrounding area (where you see this sign ), or the melted plastic as
it could cause a
BURN
.
Before storage always allow the product to completely cool after use.
This product
IS NOT A TOY.
This product is suitable for ages 14+ unless under adult supervision.
Please read this Quick Start Guide carefully before use.
If switched on, always put the pen back in its holder when not in use.
TECHNICAL SPECIFICATIONS
Play
+
3D Pen
Model No.
Power Requirement
Pen Size
Filament
USB Cable
Guarantee
Safety
3 Speed Settings
3D-FP-PL-2005-00
A 5.0 Volt DC, 2 Amp (minimum) power adapter
(5.0VDC 2.0A) MUST be used. IMPORTANT: Using an
incorrect power adapter will result in the Pen not working
correctly.
168 (l) x 24 (w) x 33 (d) mm
6.61 (l) x 0.94 (w) x 1.29 (d) inch
PLA, Deluxe Silk, Multi-Colour, Glow-in-the-Dark, P-Wood.
Type-C to USB-A 1.5m / 4.9ft
12 Month Manufacturer’s Guarantee (this may dier by state/
country according to minimum statutory requirements).
Auto Turn-o after 8 mins, for added safety.
Rapid, Normal, Fine
To Next Page
Loading...
Need help?
General
