English
9
Set termination:
Set the termination of the scanner and all other SCSI devices as
shown in the appropriate diagram in the previous section. The
last device in the SCSI chain must be terminated (or termination
on), while all other devices must be unterminated (or termina-
tion off).
Termination instructions for your other SCSI devices are pro-
vided with the devices.
50-pin Centronics F
SCSI connector
DB-25 F
SCSI connector
Termination
switch
SS_4_ENG.FMK Page 9 Thursday, April 29, 1999 11:01 AM
To Next Page
Loading...