ENGLISH
25
Chapter 3 Using the LCD TV
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
SPDIF OUT jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
HDMI IN
LRLR
PC/VGA IN
PC AUDIO IN
VIDEO IN S-VIDEO IN
COAXIAL
VHF/UHF IN
YPbPr
AUDIO IN
AUDIO IN
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
For better sound quality, you may want to use a Home Theater/Stereo System.
NOTE: If you have a Home Theater/Stereo System that you would like to use with your new Polaroid
TV, we recommend that you do NOT use your TV’s audio output for this connection.
For the best sound quality, our product testing has shown that you should connect your Home
Theater/Stereo System directly to your A/V device. I.E. You should connect your Home Theater/
Stereo System to your DVD player, Cable/Satellite box or other AV equipment.
Although not recommended, if you prefer to use the TV audio output to make this connection to your
Home Stereo System, please follow the instructions below.
AUDIO Cable
Audio Receiver
To Next Page
Loading...
Need help?
General