Polaroid Z340 Instant Digital Camera User Manual www.polaroid.com
Using the Setup Menu
Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery
power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to
normal brightness.
• The camera is idle when no buttons are pressed.
LCD Save, though enabled, does not function during
video playback, slideshow and video recording.
Setting LCD Save
Use the Date & Time function to set the date and time of your camera. This function is useful in
attaching date stamps on captured images. Your camera uses a 12-hour time format.
1 Press the navigation controls to adjust date and time value.
By holding down the or keys, the numeric values
changes continuously.
2 Press the OK button to apply changes.
Setting Date & Time
Specify in which language menus and messages are to be displayed on the LCD monitor.
1 Use the navigation control to scroll through the list
and select the desired language.
2 Press the OK button to confirm and apply settings.
Setting Language
This function allows you to select the method in which to assign file numbers to images.
Available settings are:
• Series. Assigns number to files in sequence even if
the folder is changed.
• Reset. The file numbering will start from 0001 each time
the folder is changed and "Format" is processed.
To understand folder and file structure of your camera, see
"About Folder and File Names" on page 60.
Setting File Numbering
EN-56
To Next Page
Loading...
Need help?
General
