16
Treatment:
5. Divide the face to 3 treatment areas (FIG.16):
Right cheek
Left cheek
Forehead
6. Place the device on your skin, make sure to apply a slight pressure in
order to assure a full contact between the electrodes and the skin.
7. Start moving the device in a very slow circular motion on a
small part of your treatment area (approximately twice the size
of the treatment head), slowly heating your skin to the optimal
temperature (FIG.17).
Important: Be sure to constantly move the device slowly over the skin
to ensure proper heating of the treated area. Do not keep the device on
one place without movement.
FIG.13 FIG.14 FIG.15
LOW RF
HIGH RF
To Next Page
Loading...
