16
Important: During your first treatment session, we recommend
that you use the Low power setting and then adjust the power level
according to your skin’s tolerance for subsequent treatments.
Treatment:
5. Divide the face to 3 optional treatment areas (Fig.16):
Right cheek
Left cheek
Forehead
6. Place the device on your skin, make sure to apply a slight pressure in
order to assure a full contact between the electrodes and the skin.
7. Start moving the device in a very slow circular motion on a small
part of your treatment area (approximately twice the size of the
electrodes), slowly heating your skin to the optimal temperature
(Fig.17).
FIG.13 FIG.14 FIG.15
LOW RF
HIGH RF
To Next Page
Loading...
