17
Important: Be sure to constantly move the device slowly over the skin
to ensure proper heating of the treated area. Do not leave the device
on one place without movement.
8. Once the orange indicator light illuminates followed by a 'beep' sound,
you have reached the optimal temperature. Continue the same slow
circular motion for a few moments and then gradually enlarge your
movements in the treatment area.
Proceed with this technique covering the entire treatment area, making
sure the orange indicator light is illuminated as much as possible during
the treatment.
As you move from one treatment area to another (Fig.16), the orange
indicator light may turn-off if the temperature of the skin is not warm
enough.
9. Continue working on the entire treatment area in a slow circular
motion for 4-5 minutes. Make sure to maintain a uniform heating
while covering the entire treatment area. Treatment can be augmented
by “lifting” movements from the jaw line upwards toward your cheeks
(Fig.18).
10. Once you finished the 4-5 minutes of treatment, you can proceed to
the next treatment area repeating steps 6-9.
TREATMENT
AREAS
FIG.17 FIG.18FIG.16
To Next Page
Loading...
