18
11. As a natural result of the treatment, the skin may show some redness
(erythema) and minor skin swelling (edema) in the treatment area.
Both should disappear after a short time.
12. Press the Power button for two seconds to turn the device OFF.
13. Unplug the power supply from the electrical outlet.
14. Gently remove the TriPollar
®
Preparation Gel from your skin and wash
your face. You can apply a moisturizer if desired.
15. Clean the electrodes of the device with a damp cloth or paper towel
and cover the device tip with its protective cover.
Warning: Do not submerge the TriPollar
®
Stop X device under
water.
Safety Mechanism:
The device’s automatic temperature-optimization mechanism protects the
skin from overheating. When the skin has reached the maximal
temperature, the energy source will shut down automatically. The
indication is - green LED off.
The device automatically turns the energy source back ON, when the skin
temperature drops below the maximal temperature or when you move the
device to an adjacent treatment area, where the skin temperature is lower.
The indication is - green LED on.
Important:
The orange light is ON when the temperature of the skin in the treatment
area is sufficiently heated and is OFF when it is not.
To Next Page
Loading...
