2 IK-E337-001
EKS-6000 I/O elements, the subject of this manual, meet the essential requirements of the
following regulations of the European Parliament and Council (EU) as well as European Union
directives:
CPR CPR/305/2011 Regulation (EU) no. 305/2011 of the European Parliament and of the
Council of 9 March 2011 laying down harmonised conditions for the marketing of
construction products and repealing Council Directive 89/106/EEC;
LVD Directive 2006/95/EC relating to electrical equipment designed for use within certain
voltage limits;
EMC Directive (UE) 2004/108/WE relating to electromagnetic compatibility.
Declaration of Performance no 1/E337/2014/PL has been issued for EKS-6000 I/O elements.
EKS-6000 I/O elements have received the Certificate of Constancy of Performance no.
1438-CPR-0375 issued by CNBOP-PIB, a Polish notified body no 1438 in EU, confirming the
conformity of devices with the standard requirements: PN-EN 54-18:2007, PN-EN 54-17:2007.
The Certificate and the Declaration of Performance can be downloaded from www.polon-
alfa.pl
The contents of this manual should be thoroughly read and understood before installation
and operation of the device.
Failure to follow the instructions included in this manual may be dangerous or result in the
violation of applicable regulations.
As the manufacturer, Polon-Alfa is not liable for any damages resulting from the improper
device operation that is not in accordance with this manual.
Used product at the end of its service life, unsuitable for further use,
should be handed over to one of the collection points for electrical
and electronic equipment waste.
Note – This manual as well as the device are subject to change without notice.
To Next Page
Loading...
