Need help?Do you have a question about the Polon-Alfa EKS-6022 and is the answer not in the manual?
Defines operating mode, continuity monitoring, fail-safe state, and input function.
Parameter for defining group number, ranging from 0 to 65,535.
Sets delay time for triggering, with specified ranges and steps.
Sets delay time for triggering/resetting in continuous mode.
Sets the time for resetting the element, with specified ranges and steps.
Defines the number of cycles for the element's operation, from 0 to 255.
Details authorized personnel for repair and maintenance and manufacturer responsibility.
Guidelines for safe work at height, emphasizing equipment condition and care.
Recommends protective goggles and masks when dust is produced during installation.
Advises adherence to regulations and switching off voltage before opening enclosures.
Specifies storage conditions including temperature, humidity, and avoiding direct sunlight.
Outlines transport conditions, including vehicle type, packaging, and temperature/humidity limits.
General| Input Voltage | 24V DC |
|---|---|
| Power Supply | 24V DC |
| Communication Interface | RS-485 |
| Protocol | Modbus RTU |
| Input Type | Digital |
| Output Voltage | 24V DC |
To Next Page
