How to fix a POLTI SMART 45 Vacuum Cleaner that does not turn on?
If your POLTI Vacuum Cleaner does not turn on, check the following: * Ensure the power cable (G) is properly connected to a suitable electric socket. If not, connect it. * Verify that the boiler switch (B) is turned on. If it's off, turn it on.
What to do if my POLTI SMART 45 Vacuum Cleaner is on but not producing steam?
If your POLTI Vacuum Cleaner is on but not supplying steam, it could be due to several reasons: * The appliance may not be pressurized yet; wait for the indicator light (C) to turn on. * There might be a lack of water in the boiler. If the indicator light (D) turns on each time steam is requested, refill the boiler as described in the “Preparation” section. * The steam control knob (E) may be turned completely clockwise. Turn the control knob (E) anti-clockwise to release the steam.
General| Power | 1500 W |
|---|---|
| Weight | 4.2 kg |
| Filtration System | HEPA filter |
| Steam pressure | 3.5 bar |
| Steam duration | Unknown |
To Next Page