How to fix POLTI Steam Cleaner when ON lamp is off?
If the ON lamp is off, verify that the appliance is properly plugged into the mains socket. Also, check to make sure that the appliance has been turned on using the ON/OFF switch.
What to do if my POLTI Steam Cleaner's ON lamp is on but no steam comes out?
If the ON lamp is lit but no steam is delivered, wait for the steam pressure indicator lamp to turn on, which usually takes about 10 minutes. If steam is still not delivered once the lamp is on, the boiler may be empty. Refill it according to the instructions in the manual.
Why is the ON lamp off on my POLTI Steam Cleaner?
If the ON lamp on your POLTI Steam Cleaner is off, check that the power cord is properly plugged into a working electrical outlet and make sure that the appliance is turned on using the ON/OFF switch.
What to do if POLTI Steam Cleaner ON lamp is on but no steam is delivered?
If the ON lamp is illuminated but no steam is being delivered, wait for the steam pressure indicator lamp to turn on, which usually takes about 10 minutes. If steam is still not delivered after the steam pressure indicator lamp turns on, the boiler is likely empty. Refill the boiler according to the instructions provided in the manual.
What to do if my POLTI Vaporetto Go ON lamp is on but no steam is delivered?
If the ON lamp is illuminated but no steam is coming out of your POLTI Vacuum Cleaner, the first thing to check is the water level in the boiler. If it's empty, refill it following the instructions in the manual. Also, allow approximately 10 minutes for the steam pressure indicator lamp to light up.
How to unscrew the safety cap on a POLTI Vaporetto Go Vacuum Cleaner?
If you're having trouble unscrewing the safety cap on your POLTI Vacuum Cleaner, make sure the appliance is turned off and unplugged. Then, activate the steam control lever on the steam sprayer until all steam has been released. If it's still stuck, try gently pressing the cap pin while unscrewing the cap.
Why is the ON lamp off on my POLTI Vacuum Cleaner?
If the ON lamp (D) is off on your POLTI Vacuum Cleaner, start by verifying that the plug is correctly inserted into the power socket. Then, make sure you've switched the appliance on using the ON/OFF switch (C).
Why my POLTI Vacuum Cleaner does not turn on?
If your POLTI Vacuum Cleaner does not turn on, it might be due to a lack of power. Please ensure that the appliance is properly connected to the mains, as detailed in Section 1 of the manual.
What to do if my POLTI Vaporetto Go does not dispense steam?
If your POLTI Vacuum Cleaner is not dispensing steam, here are a few potential causes and solutions: * **Out of water:** Add water to the boiler as described in Section 12. * **Steam lock activated:** Deactivate the steam lock on the handle. * **Boiler not pressurised:** Wait until the steam indicator light goes off. * **Steam hose trapped or twisted:** Check that the steam hose is not trapped or twisted.
How to increase steam output on POLTI Vacuum Cleaner?
If your POLTI Vacuum Cleaner is pressurised but only a little steam comes out, the steam adjustment dial may be set to the minimum. Try adjusting the position of the dial to increase the steam output to your desired level.
General| Type | Cylinder steam cleaner |
|---|---|
| Capacity | 0.95 L |
| Product color | Blue, White |
| Steam pressure | 3.5 bar |
| Adjustable steam | Yes |
| Continuous steam performance | 90 g/min |
| Dimensions (WxDxH) | 350 x 180 x 285 mm |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 350 mm |
| Height | 285 mm |
| Weight | 2700 g |
Guidance on proper grounding to prevent electric shock.
Risks of improper connection and general safety advice.
Ensure correct wiring and voltage matching.
Precautions for cord, wet hands, and water immersion.
Warnings about steam contact and cooling procedures.
Steps for safely refilling the boiler tank when hot.
Advice on water, cleaning agents, and spare parts.
Intended use as a steam generator.
Instructions for safety cap, plug connection, and filling.
Solutions for power, steam, and cap problems.
To Next Page
