Why POLTI Steam Cleaner does not suction?
If your POLTI Steam Cleaner isn't suctioning, it's likely due to float action. Turn the suction off, restore the correct water level in the tank, and then turn the appliance back on again.
Why is the suction power decreased on my POLTI Steam Cleaner?
If your POLTI Steam Cleaner's suction power has decreased, it's likely due to a blockage in the nozzle, suction hose, or suction tube, or a blocked or dirty HEPA filter. To resolve this, clean the filter and remove any blockages from the tubes and accessories. You can find instructions on how to do this in the "WASHABLE HEPA FILTER" section.
How to fix a POLTI Steam Cleaner that does not start?
If your POLTI Steam Cleaner isn't starting, the most common cause is a lack of power. Check the cable, plug, and socket to ensure they are properly connected and functioning.
What to do if water leaks out when vacuuming liquids with POLTI Steam Cleaner?
If water leaks out of your POLTI Steam Cleaner when vacuuming liquids, it's probably due to a blocked float. Clean the "Eco-Active” water filter assembly to fix this.
General| Type | Steam Vacuum Cleaner |
|---|---|
| Power | 1700 W |
| Water Tank Capacity | 1.8 L |
| Weight | 9 kg |
| Cord Length | 6 m |
| Dust Capacity | 1.2 L |
| Steam Pressure | 4 bar |
| Noise level | 75 dB |
To Next Page
