Poly ROVE - Page 2

© 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. DECT is a trademark of ETSI. All trademarks are the
property of their respective owners.
2 Do one of the following:
 Choose a contact in the All Calls list and
then select Call.
 Use the navigation keys to view the
Received Calls, Dialed Calls, or Missed
Calls lists, and then select a contact and
select Call.
Answering and Ending
Calls
Answer an Incoming Call
Answer an incoming call from the wireless
handset.
Do one of the following:
 Select Call .
 Select the Answer softkey.
 Press the Speakerphone button.
Answer an Incoming Call During a Call
A tone plays when you receive an incoming call
during an active call.
Do one of the following:
 Select Call .
 Select the Answer softkey.
 Press the Speakerphone button.
The first call goes on hold automatically.
End a Call
You can end an active call at any time.
Do one of the following:
 Select End.
 Place the wireless handset in its cradle or
the charging cradle.
Holding, Resuming, and
Switching Between Calls
Hold a Call
You can place up to two active calls on hold at
any time.
 During a call, select Options > Hold.
 During a call, select the Hold softkey.
Resume a Call
You can resume any held call on the wireless
handset.
 Select Options > Resume.
 Select the Resume softkey.
Switch Between Calls
You can switch between calls when you have at
least one active call and one held call on the
wireless handset.
 With one active call and a held call, press
Swap. If you’re using a Rove 20, press
Options > Swap.
Transferring Calls
Transfer a Call to Another Wireless
Handset
You can transfer a call on your wireless handset
to another contact to enable someone else to
take the call or to resume the call on another
handset.
1 During a call, select Options > Transfer.
2 Enter a number or select a contact from a
directory or the recent calls list.
3 Select Call.
4 Talk with your contact, then select Options >
Transfer again, or press the Complete
Transfer softkey, to complete the
transfer.
Blind Transfer a Call to a Contact
Blind transferring a call sends the call to another
contact without your speaking to the contact first.
1 During a call, select Options > Blind Transfer.
2 Enter a number or select a contact from a
directory or the recent calls list.
3 Select Transfer.
The phone transfers the call when the contact
answers the call.
Getting Help
Visit Poly Support for help with setting up and
using your phone.
Poly Documentation Library
For more information on phone settings, see the
Poly Rove DECT IP Phone User Guide.