EasyManua.ls Logo

Poly Rove Series User Manual

Poly Rove Series
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Poly Rove Manual Provisioning
Objective
Manual provisioning of Poly Rove series DECT phones for the 8x8 Work service.
Applies To
Poly Rove B2
Procedure
Note: If you need to reset your Poly Rove to its factory default settings, follow the steps in the Restore Factory Default
Settings section first, and then provision your phone.
Provisioning
First, you'll need to obtain the local (internal network) IP address of your phone:
1.
Connect the phone to your local network and power it up.
2. Once the phone boots up, press the Menu Button
https://support.8x8.com/equipment-devices/phones/poly/Poly_Rove_Manual_Provisioning
Updated: Mon, 03 Oct 2022 19:31:49 GMT
Powered by
1
Question and Answer IconNeed help?

Do you have a question about the Poly Rove Series and is the answer not in the manual?

Poly Rove Series Specifications

General IconGeneral
Wideband AudioYes
SpeakerphoneYes
Caller IDYes
Call WaitingYes
ConnectivityDECT
Conference CallingYes
Power SourceRechargeable battery

Summary

Objective

Applies To

Manual Provisioning Procedure

Obtain Phone IP Address

Connect phone to network, power it up, and press the Menu Button to access IP.

Navigate to Info Icon

Navigate to the Info Icon on the phone's screen.

Note Network IP Address

Note the Network IP address for provisioning server configuration.

Access Phone Web Interface

Enter the phone's IP address into a web browser to access its interface.

Phone Login Credentials

Log in using 'admin' username and the set admin password.

Configure Auto Provisioning

Navigate to System Management > Auto Provisioning and set UCSServer URL.

Submit and Reboot Base Unit

Submit provisioning changes and manually reboot the Base unit.

Activate Phone Service

Activate the phone for the 8x8 service using activation code or MAC address.

Restore Factory Default Settings

Access Reset Interface

Access the phone's web interface via IP address to initiate reset.

Login for Reset

Log in with 'admin' credentials to access the reset functions.

Additional Information

Poly Rove B2 Limitations

Details known limitations for Poly Rove B2 regarding concurrent calls and codecs.

Related product manuals