ANC and Transparency Mode
Active Noise Canceling (ANC) reduces external noise and enhances your music
and sound quality. Transparency Mode allows you to hear your surroundings while
wearing your earbuds.
■
To switch between ANC and Transparency mode, choose from one of the
following:
● Earbuds: With your earbuds idle, press your earbud's button for 2
seconds to switch between your selected ANC Mode and your selected
Transparency Mode.
● Poly Lens App : Go to Settings > ANC: Tap to view and select your ANC
Mode or Transparency Mode. For more about these settings, see ANC and
Transparency Mode settings on page 16.
NOTE: Your earbuds must be idle or streaming media to switch between
modes. Modes cannot be switched during a call.
Use sensors
Smart sensors respond when you put on or take off your earbuds. Customize in
Poly Lens App . Below describes default settings.
With active sensors
Putting on earbuds will: Taking off earbuds will:
Incoming call Answer the incoming call --
Music/streaming media Resume music/media* Pause music/media*
NOTE: *Functionality varies by application. May not function with web-based
apps.
Voice assistant (smartphone feature)
■
Siri, Google Assistant
™
, Cortana Press and hold the earbud button for 2
seconds to activate your smartphone's default voice assistant. Wait for the
phone prompt to activate voice dialing, search, and other smartphone voice
controls.
NOTE: Ensure VPA is the selected Custom button setting. For more, see
Customize your earbud on page 16.
ANC and Transparency Mode
13
To Next Page
Loading...
