EasyManua.ls Logo

Polycom Ceiling Microphone Array User Manual

Polycom Ceiling Microphone Array
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.polycom.com
© 2018, Polycom, Inc. All rights reserved. POLYCOM® and the names and marks associated with Polycom’s products are trademarks and/or
service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries.
By using this product, you are agreeing to the terms of the End User License Agreement (EULA) at:
http://documents.polycom.com/indexes/licenses.
If you do not agree to the terms of the EULA, do not use the product, and you may return it in the original packaging to the seller from whom you
purchased the product.
August 2018
Polycom
®
Ceiling Microphone Array
SETUP SHEET
1725-27017-007E
If you are setting up a Polycom Ceiling Microphone Array, begin on page 2.
If you are setting up a Polycom Ceiling Microphone Array Extension Kit, begin on page 8.
If you are setting up a Polycom telepresence system, refer to the Installation Guide for your
ITP product.
Before you begin, make sure that your ceiling can support up to .9 kg (2 lbs). Also, verify
that the installation parameters described in this document comply with the code
requirements in your local jurisdiction.
Question and Answer IconNeed help?

Do you have a question about the Polycom Ceiling Microphone Array and is the answer not in the manual?

Polycom Ceiling Microphone Array Specifications

General IconGeneral
BrandPolycom
ModelCeiling Microphone Array
CategoryMicrophone system
LanguageEnglish

Summary

Polycom Ceiling Microphone Array Setup Guide

Installation for Suspended Ceilings

Cable Verification and Height Adjustment

Verify cable connector pins and adjust microphone ball height for suspended ceiling installation.

Preparing the Ceiling Tile

Cut and prepare the suspended ceiling tile for mounting the electronics enclosure.

Securing the Electronics Enclosure

Securely attach the electronics enclosure to ceiling supports for added safety.

Cable Routing and Wall Plate Installation

Route cables through the ceiling and install the wall plate for suspended installations.

Installation for Ceilings That Are Not Suspended

Attaching and Aligning the Electronics Enclosure

Attach enclosure using suitable hardware and align the microphone array dot toward the main display.

System Compatibility and Connections

Polycom RealPresence and HDX System Connections

Connect the microphone array to various Polycom RealPresence Group and HDX systems.

Polycom SoundStructure System Connections

Connect the microphone array to Polycom SoundStructure C-Series systems.

Polycom Ceiling Microphone Array Extension Kit Setup

Extension Kit for Suspended Ceilings

Install the extension kit for suspended ceilings, including cable verification and height adjustment.

Extension Kit Cable Routing and Wall Plate

Route extension kit cables and install the wall plate for non-suspended ceilings.

Related product manuals