31
Accessories
Quad Charger
The Quad Charger is designed to simultaneously charge four Battery
Packs. It may be mounted on a horizontal or vertical surface.
The Battery Pack snaps into the charging slot. The LED above the occu-
pied bay indicates the charging status of the Battery Pack in the bay.
A flashing LED may indicate a Battery Pack failure. Verify
the condition of the Battery Pack by the following proce-
dure before replacing it. First check the Battery Pack in a
different bay or substitute another charger and repeat the
operation that caused the failure. If the same Battery Pack
lights a steady LED when inserted in a different bay or
charger, the first charger may be faulty. Contact your sys-
tem administrator for service information.
To Next Page
Loading...
Need help?
General
