LUBE
NOTE
1 2 3 4
HOW TO CLEAN THE BIKE
Use a bike wash or wet cloth
to clean up every part of
your bike. Preferably using a
specific cleaner for the bike.
Wipe the bike immediately
until it’s dry. Do not leave it
in wet conditions for
a long time.
Clean up the drivetrain with
a clean and dry cloth.
Check and lubricate every
component if needed,
especially 2 or more
components that rub against
each other, such as the seat
post, bottom bracket, hub,
pivot frame suspension, etc.
• Use the right bike wash
to make sure your every
bike component and
frame is safe.
• Avoid washing the bike
using high-pressure water.
• It is highly recommended
to use specific lubricants
for bicycle parts, not with
engine vehicles or other
oil since it might lead to
component performance
reduction.
• It is recommended to use
a bike cleaner rather than
detergent, solvent like
acetone, and thinner to
clean the bike parts.
Manual Guide23 / Bike Maintenance
To Next Page
Loading...
