Polygroup PoolBot - Maintaining the Poolbot

11
1. Open all lock latches, detach the top cover and remove the filter screen.
2. Rinse off all the dirt and debris with running water. Use mild dish detergent if necessary.
3. Wipe the PoolBot with a clean cloth and let it air dry.
3. Combinations:
B – A Maximum maneuvering (Factory setting, ideal for round above-ground pool)
B – C Smaller rebounding angle than B – A
C – A Smaller rebounding angle than B – C
C – C Minimum maneuvering (For rectangular or longer pool)
Combination B-A
Maintaining the PoolBot