EasyManua.ls Logo

Polygroup Summer Waves Maintenance Kit - Operation Instructions; To Use The Leaf Net; Vacuuming with Summer Waves Skimmer Pump Models SFS and SFX

Polygroup Summer Waves Maintenance Kit
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION INSTRUCTIONS
To Use The Leaf Net
1. Extend the telescopic pole to the desired length.
2. Attach the leaf net to the open end of the telescopic pole.
3. Scoop out leaves and other debris from the pool.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
OWNERS MANUAL
Directions for Vacuuming With Polygroup
®
Summer Waves Skimmer Pump Models SFS and SFX Only.
2. Attach the vacuum head to the open end of the telescopic pole.
3. Turn on the Skimmer Pump, water will start to flow to the pool through the
return fitting. Keep the pump running throughout the vacuuming process.
4. Hand tighten the water hose cap of the vacuum head.
6. Attach the 1¼” flexible hose to the vacuum head and tighten the hose clamp.
7. Put the vacuum head under water.
5. Loosely attach the hose clamps over the cuffs on the open ends of
the flexible hose.
2
Spring
Latch
1. Extend the telescopic pole to its fullest length.
IMPORTANT NOTE: For vacuuming with other Polygroup
®
Filter Pump Systems; Models: CP2000-C, RP, RX and Sand Filtration Systems;
Please follow the directions on page 4 of this manual.

Related product manuals