19
CAUTION: Fumes from acidic solutions may cause corrosion
of the stainless steel reservoir. Care should be taken to
maintain a neutral pH at all times.
!
Stay within the uid’s normal range for best temperature stability and low
vaporization. At uid’s high temperature extreme:
• A fume hood may be required to prevent the buildup of vapors inside
the room.
• Fluid loss from vapor will have to be frequently replenished.
• Caution must be taken to stay well below the uid’s ashpoint.
Application Notes
For optimum results, maintain uid level throughout the operating period,
adding uid as needed. Attempt to rell uid at same temperature as
bath.
Use the bath lid and/or hollow plastic oating balls (part number 060301)
to help prevent heat and vapor loss.
This unit is designed for indoor use only with an allowable ambient
temperature between +5°C to 40°C (41° to 104°F) and relative humidity
not greater than 80%.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
