The PondXpert Easyfilter 4500 is an external pond filter designed for maintaining clean and healthy pond water. It features both mechanical and biological filtration, along with a UV clarifier, to effectively remove debris, harmful substances, and algae from the pond.

Function Description:

The Easyfilter 4500 operates by drawing pond water through an inlet valve, passing it through various filtration stages, and then returning clean water to the pond via an outlet valve. It incorporates a UV bulb to combat green water algae and a cleaning mode for easy maintenance.

Important Technical Specifications:

Model: PondXpert Easyfilter 4500
Filtration Stages:
- Mechanical Filtration: Utilizes filter foams (black and blue) to trap physical debris. The black foam is placed above the blue foam.
- Biological Filtration: The unit includes biological media, protected by a plastic tray, which provides a surface area for beneficial bacteria to colonize and break down harmful waste products.
- UV Clarification: An integrated UV bulb helps to clump together single-celled algae, making them easier for the mechanical filter to remove, thus preventing green water.
Valves/Connections:
- (1) Outlet Valve: For returning clean water to the pond.
- (2) Inlet Valve: Connects to the pond pump to draw in water.
- (3) Dirty Water Valve: Used during the cleaning process to direct accumulated dirty water away from the filter.
Power: The UV bulb requires electrical power. The specific wattage is not provided in the manual but is implied by the presence of the bulb.
Capacity: The "4500" in the model name likely indicates its suitability for ponds up to 4500 liters (or gallons, depending on regional standards, though liters are more common for pond equipment in the UK where PondXpert is based).

Usage Features:

Easy Setup: The manual provides clear instructions for fitting the hosetails securely to the screw fittings on the front of the filter unit. It emphasizes the importance of connecting the correct pipes to each hosetail for optimal performance.
Filter Foams: The filter contains two layers of filter foams: black on top and blue underneath. It is crucial to maintain this order when replacing them. A plastic tray at the bottom protects the biological media and aids in the drainage of the filter foams.
Normal Filtering Mode: The filter arrives set in the normal filtering position, with the grey handles pointing down to the left. In this mode, water flows through the filtration media and UV clarifier before returning to the pond.
Cleaning Mode: To activate the cleaning function, the grey handles need to be moved to an alternative position, pointing down to the right. This diverts water to the dirty water valve, allowing for backwashing or rinsing of the filter media without disassembling the unit. The manual notes that the handles might be stiff initially due to the unit being new, and a little pressure and rocking should help rotate them.

Maintenance Features:

Accessing the Filter: To access the internal components for maintenance (e.g., cleaning or replacing foams), the metal clamp holding the base and lid together must be removed. The lid can then be pulled apart from the base. The manual mentions that the lid might be stiff to remove initially, which is normal for a new unit.
O-Ring Placement: An O-ring is crucial for sealing the unit. The manual explicitly indicates to "PLACE THE O-RING IN THIS GROOVE" when reassembling the filter, ensuring a watertight seal.
Filter Foam Replacement/Cleaning: The filter foams are accessible once the lid is removed. They should be cleaned or replaced as needed, always ensuring they are reinserted in the correct order (black over blue).
UV Bulb Replacement: The manual provides detailed steps for changing the UV bulb:
1. Turn the lid upside down to access the plastic quartz housing.
2. Remove three screws to access the casing surrounding the bulb.
3. Remove the casing.
4. Turn the screw fitment at the base of the quartz sleeve anti-clockwise to remove the quartz sleeve.
5. The UV bulb, held by pins, can then be easily removed and replaced. Regular replacement of the UV bulb (typically annually) is essential for effective algae control.
Cleaning Mode Operation: The dedicated cleaning mode simplifies the process of flushing out accumulated sludge and debris from the filter foams, reducing the need for frequent manual disassembly. This is achieved by repositioning the grey handles to direct dirty water out through the dirty water valve.

The PondXpert Easyfilter 4500 is designed for ease of use and maintenance, providing a comprehensive solution for pond water clarity and health.

PondXpert Easyfilter 4500 - Product View

Table of Contents

Related product manuals