Climate Controls
Climate Control System
With this system you can control the heating, cooling
and ventilation for your vehicle.
Operation
To change the current mode, turn the right dial to select
one of the following:
Y (Vent): This mode directs air to the instrument
panel outlets.
% (Bi-Level): This mode directs the air to the
instrument panel outlets and the floor outlets. This
position can be used for most winter driving.
[ (Floor): This mode directs the air to the floor
outlets.
The right dial can also be used to select defog or
defrost modes. Information on defogging and defrosting
can be found later in this section.
9 (Fan): Turn the left dial clockwise or
counterclockwise to increase or decrease the fan speed.
The fan must be on to run the air-conditioning
compressor.
3-19
To Next Page
Loading...
