Front Seats
Power Seats
The power front seat controls are located on the
outboard side of the driver’s and passenger’s seat.
The horizontal switch is used to electrically adjust the
height, the tilt, and the movement of the seat forward
and rearward. The vertical switch is used to electrically
adjust the angle of the back of the seat.
To adjust the seat, do the following:
• Move the seat forward or rearward by sliding the
horizontal switch toward the front or rear of the
vehicle.
• Raise or lower the seat cushion by sliding the
horizontal switch up or down.
• Tilt the horizontal switch up at the front to tilt the
front of the seat up, and tilt the horizontal switch
down at the rear to tilt the seat down at the rear.
• Tilt the vertical switch to adjust the angle of
the seatback. The seat back moves in the same
direction that the switch is tilted to.
Manual Lumbar
The manual lumbar control
lets you adjust the amount
of support in the lower
seatback.
1-2
To Next Page
Loading...
Need help?
General
