3. To remove the bulb, pull it out of the assembly.
4. Push in a new bulb.
5. Reverse Steps 1 and 2 to reinstall the taillamp
assembly.
Back-Up Lamps
If you have a four-door sedan, do the following to
replace a back-up lamp:
1. Remove the back-up lamp assembly from the
fascia.
2. Gently pull the bulb assembly from the fascia.
3. Remove the bulb from the socket by turning
it one-quarter turn counterclockwise.
4. Replace the bulb and reinstall the bulb assembly by
reversing Steps 1 and 2.
5-47
To Next Page
Loading...
