EasyManua.ls Logo

Poolspa VICTORIA SPA - Conservation Substances; Jets

Poolspa VICTORIA SPA
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
All these functions are not available until ICE symbol disappered. Is possible to take a bath but use
of any pump.
• If electronic system detects temperature below 15
0
C degrees of the surrounding air then ANTI-
FROST systems starts after 15 minutes from last pump switch off.
• If during filtration mode ANTIFROST system starts, filtration mode will be switch off.
1.2. Conservation substances
The acrylic surface of the bath is covered with a thin layer of wax, being the remaining of the polis-
hing process. Metallic elements have been coated with silicone oil for protection purposes. The SPA
should be washed off (e.g. with a dishwashing detergent) prior to fi lling the bath with water.
1.3. Jets
SPA VICTORIA is equipped with an innovative jet system:
Jets Quantity Photo
xed mini jets 16 pcs.
xed ozone mini jet 1 pcs.
4” adjustable rotating stream jets 4 pcs.
4” pulsating stream jets 2 pcs.
4” multi-massage jets 2 pcs.
Location of individual water jets is shown in detail on fi g. 1-4.
The hydromassage can be intensifi ed by turning the jets in a
clockwise direction of about 90°. Turning in an anti-clockwise
direction will close the jets.
Fig. 1-2. Increasing massage intensity

Related product manuals