Why doesn't my poolstar RED PANTHER have full coverage?
If your Poolstar Swimming Pool Vacuum doesn't fully cover the pool, it might be due to an unsuitable nozzle angle. Try adjusting the nozzle angle. If you have a uniquely shaped pool, adjust the nozzle to increase the angle of deflection. Also, ensure that the pool water filtration system is turned off.
How to fix a poolstar RED PANTHER that doesn't work and has a red light?
If the Poolstar Swimming Pool Vacuum cleaner is not working and the light indicator is red, it is likely due to low remaining battery capacity. You should charge the battery.
What to do if Poolstar Swimming Pool Vacuum cleaner doesn't work and the blue indicator light flashes?
If your Poolstar Swimming Pool Vacuum cleaner isn't working and the blue indicator light is flashing, this indicates pump protection is active. Try restarting the robot.
What to do if my poolstar RED PANTHER Swimming Pool Vacuum cleaner doesn't work and the indicator light doesn't flash?
If the Poolstar Swimming Pool Vacuum cleaner does not work and the indicator light does not flash, it means that battery protection is active. Charge the robot, and if it still doesn't work, contact after-sales service.
General| Brand | poolstar |
|---|---|
| Model | RED PANTHER |
| Category | Swimming Pool Vacuum |
| Language | English |
Essential safety measures and warnings to follow before and during pool cleaner operation.
Instructions for charging the battery and starting the pool cleaner's automatic cleaning cycle.
Explanation of nozzle operation and how to adjust settings for different pool cleaning routes.
Procedure for safely opening, removing, and cleaning the filter tray and chassis.
To Next Page
