19
EN
d. Reassemble the cleaner
e. Push the clips on
IV. Troubleshooting
Symptom Possible reason Solution
The cleaner does not work and the
light indicator is red.
Low remaining battery capacity Charge the battery
The cleaner does not work and the
red indicator light slowly flashes.
Internal fault Contact after-sale service
The cleaner does not work and the
blue indicator light flashes.
Pump protection Re-start the robot.
The cleaner does not work and the
indicator light does not flash
Battery protection
Charge the robot and in case it does
not work, please ask for after sales
service
The adapter indicator light does
not work.
Adapter damage Contact after-sale service
The cleaner does not have a full
coverage of pool.
Unsuitable nozzle angle Adjust nozzle angle
Special pool shape
Adjust nozzle to increase angle of
deflection
Pool water filtration system is open. Turn off water filtration system
Do not return the product to the store.
Contact the local after sales service on
http://support.poolstar.fr
IMPORTANT
!
To Next Page
Loading...
